A Fully Updated 2024 CT-TAE Exam Dumps - PDF Questions and Testing Engine
Easy Success ISTQB CT-TAE Exam in First Try
ISTQB CT-TAE certification is a valuable credential for software testing professionals who want to specialize in test automation. Certified Tester Test Automation Engineer certification covers a wide range of topics related to test automation and is globally recognized. Certified Tester Test Automation Engineer certification not only validates the candidate's knowledge and skills but also demonstrates their commitment to the software testing profession.
NEW QUESTION # 24
You are working on a government system called "Making Tax Digital" or MTD for short. This system is being implemented to stop manual human input error and also to reduce fraudulent behaviour from companies when submitting their tax and VAT returns.
The key concept is that registered companies will need to use government recommended 3rd party software for their accounts and book keeping. These 3rd party applications will have a direct interface into the government's main system for transactions and submissions.
You have been using a test execution tool successfully on the project so far. and have implemented a basic "capture/replay" approach to scripting.
The management have been encouraged with the automation so far, but want the following objectives to be met:
* Test cases added easily
* Reduction in the amount of scripts and script duplication
* Reduction in maintenance costs
Which scripting technique would be MOST suitable in this scenario in order to meet the objectives?
- A. Structured scripting
- B. Data-driven scripting
- C. Linear scripting
- D. Keyword-driven scripting
Answer: D
NEW QUESTION # 25
Consider the following layers of the gTAA structure:
a. Test generation layer
b. Test definition layer
c. Test execution layer
d. Test execution layer
Consider the following capabilities associated with these layers.
Acquire all the necessary resources before each test and release all after run, in order to avoid interdependences between test Allow the automated test scripts on an abstract level to interact with components, configurations and interfaces of the SUT.
Design test directives that allow configuring the algorithms used to automatically produce the test cases a given model of the SUT.
Allow the definition and implementation of test cases and data by means of templates and/or guidelines.
Which of the following BEST matches each layer with the appropriate capability?
- A. a-4, b-3, c-2, d-1
- B. a-3, b-4, c-2, d-1
- C. a-3, b-4, c-1, d-2
- D. a-4, b-3, c-1, d-2
Answer: A
NEW QUESTION # 26
Which of the following is an important success factor for any significant automation project?
- A. The SUT must be designed for testability
- B. The TAA must be designed for testability.
- C. The TAA is self-documenting
- D. The SUT is self-documenting
Answer: A
NEW QUESTION # 27
As the TAE, you are working with the organisation's Test Manager to decide which external metrics and which internal metrics should be gathered for the new TAS.
Which of the following represents the BEST internal metric that would help measure the quality of the TAS and the number of problems associated with the TAS?
- A. The average maintenance cost to keep an automated test in sync with the SUT
- B. A measure of how many automated tests pass and fail
- C. A measure of defect density within the TAS automation code
- D. The number of hours of manual test effort saved by implementing a TAS
Answer: C
NEW QUESTION # 28
Which of the following CORRECTLY describes how automation SHOULD be applied to confirmation testing?
- A. A confirmation test should only be automated after it has been run manually
- B. Confirmation tests should only be automated if they fail to pass on the first attempt
- C. Confirmation tests can be automated and incorporated into an automated regression suite to show whether defects that were previously fixed reoccur
- D. Confirmation tests are not good candidates for automation as they are not designed to run many times
Answer: C
NEW QUESTION # 29
You have implemented a keyword-driven scripting framework, which uses a test execution tool to run the tests. This has been in use for the past year and all of the teams now use this framework as the standard approach for test execution.
The teams all work on different aspects of the SUT and they have all experienced significant benefits in the use of this scripting framework. However, on closer examination, you have discovered that there are numerous instances where the teams have the same functionality to test but are using different keywords.
One of your objectives for improvement is to create consistency among the teams.
What is the BEST way to handle this situation?
- A. Create a central library of keywords and associated definitions for each team to use.
- B. Move to a model-based approach to scripting where the models include the keywords.
- C. Do nothing, each team are working in isolation and they are all experiencing significant benefits in the way they are currently working.
- D. Provide each team with a set of guidelines and naming conventions for keywords.
Answer: A
NEW QUESTION # 30
Which of the following metrics could suggest, under certain condition that an automated regression test suite has NOT been updated for new functionalities added to the SUT?
- A. The SUT code coverage provided by the execution of the regression test suite.
- B. The ratio of commands to executable statements in the automation code of the regression test suite
- C. The ratio of comments to executable statements in the SUT code.
- D. The defect density in the automation code of the regression test suite.
Answer: A
NEW QUESTION # 31
Your organisation has successfully implemented a Test Automaton Solution (TAS) for a new project which has since been delivered into production via a number of sprints. A series of maintenance releases are now planned.
Some improvements were made to the Test Automation Architecture (TAA) as a result of feedback from the early sprints. The TAA improvements affected the TA, and the TAS was changed for the final sprint.
The new version of the TAS was generally well received but some performance and usability issues were encountered with the TAS which have yet to be addressed.
The test automation engineers supporting the maintenance releases must decide whether to use the enhanced TAS or the version that was used successfully for previous sprints.
What is the BEST action to take next?
- A. Use the new version of the TAS for the first maintenance release on a trial basis. If issues are encountered, switch to the previous version for later releases until the issues are resolved.
- B. Use the previous version because this was proven to work. It will be too risky to use the new version, with unresolved issues, for a live system.
- C. Perform an analysis of risks versus benefits for the enhanced TAS and then decide which version to use.
- D. Use the new version because, despite some issues, it works, and the live system should not be tested using a different TAS.
Answer: A
NEW QUESTION # 32
You have been asked to automate a set of functional tests at system Test level via the CLI of the SUT for the first release of a software system. The automated tests will be delivered to the learn in change of maintenance testing, who will use them for part of the regression testing. They have the following requirements.
1. The automated tests must be as fast and cheap to maintain as possible
2. The cost of adding new automated tests must be as low as possible
3. The automated tests must have a high level of independence from the tool itself Which of the following scripting techniques would be MOST suitable?
- A. Data-driven scripting
- B. Linear scripting
- C. Structure scripting
- D. Keyword-driven scripting
Answer: C
NEW QUESTION # 33
You are implementing test automation for a project and you want to be able to generate test cases automatically using a series of test design tools which use a variety of test design techniques such as decision tables, pairwise testing and boundary value analysis.
You also want to generate test data automatically which can then be used by the tests.
Initially these tests will be run manually to verify their correctness and ultimately you want to include them in the test execution tool so that they can run unattended.
Which layer of the gTAA will be used to support the specification of the test cases and preparation of the test data?
- A. The generation layer
- B. The definition layer
- C. The execution layer
- D. The adaptation layer
Answer: B
NEW QUESTION # 34
A web application was released into production one year ago, it has regular release which follow a V-model lifecycle and testing is well-established and fully integration into the development lifecycle. You have been asked to implement a TAS for the regression test suite. The regression tests have been developed via the GUI and are expected to be run at least four times a month, for each planned release, for the whole operation solution life of the system (six years). Each screen of the GUI uses several third-party controls which are not compatible with the existing automation solutions. The environment for the automation will be stable, fully controllable and separated from other environments (development, staging, production).
What could be the MOST problematic for this TAS?
- A. Frequency of use
- B. Complexity to automate
- C. Maturity of the test process
- D. Sustainability of the automated environment
Answer: D
NEW QUESTION # 35
Consider A TAS for testing a desktop application via its GUI. All the test cases of the automated test suite contain the same identical sequences of steps at the beginning (to create the necessary objects when doing a preliminary configuration of the test environment and at the end (to remove everything created -specifically for the test itself during the preliminary configuration of the test environment). All automated test cases use the same set of assertion functions from a shared library, for verifying the values in the GUI fields ( e.g text boxes).
What is the BEST recommendation for improving the TAS?
- A. Adopting a set of standard verification methods for use by all automated tests
- B. Implementing standard setup and teardown functions at test case level
- C. Improving the architecture of the application in order to improve its testability
- D. Implementing keywords with higher level of granularity
Answer: D
NEW QUESTION # 36
You are using a gTAA to create a TAS for a project. The TAS is aimed specifically at automating a suit of existing manual test cases for standalone desktop applications. All the interfaces between the TAS and SUT will be from the CUI of the application.
Which of the following layers of the gTAA should you focus on for the TAS?
- A. The Test Adaption layer
- B. The Test Definition layer
- C. The Test Execution layer
- D. The test Generation layer
Answer: A
NEW QUESTION # 37
The Test Automation Manager has asked you to provide a solution for collecting metrics from the TAS that measures code coverage every time the automated regression test pack is run. The metrics must be trend based to ensure that the scope of the regression test pack continues to reflect enhancements made to the SUT - coverage must not drop and should ideally increase. The solution must be as automated as possible to avoid unnecessary manual overheads and errors.
Which of the following approaches would BEST meet these requirements?
- A. Test automation cannot measure code coverage for the SUT, only the code for the automation tools and scripts. The automated test cases would need to be run manually with a code coverage and reporting tool running in the background.
- B. The automated testware would record the pass/fail rate of each regression test case, export the data to a pre-formatted Excel spreadsheet that automatically updates a trend analysis success rate bar chart and emails it to stakeholders.
- C. The automated testware would record overall code coverage for each run, export the data to a pre-formatted Excel spreadsheet that automatically updates a trend analysis bar chart for you to distribute to stakeholders.
- D. The automated testware would record overall code coverage for each run and add the figure to a new row in a pre-formatted Excel spreadsheet. You would then present the spreadsheet to stakeholders so they could look for changes in coverage.
Answer: C
NEW QUESTION # 38
When if the BEST time for automation to consider legal and/or standard requirements for a SUT?
- A. When designing a TAA
- B. When designing a TAF
- C. When implementing the SUT
- D. When developing a TAS
Answer: C
NEW QUESTION # 39
......
CT-TAE Study Material, Preparation Guide and PDF Download: https://dumpspdf.free4torrent.com/CT-TAE-valid-dumps-torrent.html