[Feb 06, 2022] Powerful BL0-100 PDF Dumps for BL0-100 Questions
Authentic BL0-100 Dumps - Free PDF Questions to Pass
NEW QUESTION 13
Which of the following drive 5G higher reliability?
- A. Lower Time Transmission Interval (TTI)
- B. Connectionless radio access
- C. Multi-connectivity per User Equipment
- D. Higher spectral efficiency
Answer: D
NEW QUESTION 14
Which of the following statements about Network Slicing are correct? (Choose three.)
- A. Specific resources can be allocated to a given slice.
- B. Multiple slices create multiple virtual network instances.
- C. Network Slicing is a way to physically partition the common network infrastructure.
- D. Unique Quality of Service can be allocated to a given slice.
Answer: A,B,D
NEW QUESTION 15
What is the "sweet spot" for Industry 4.0?
- A. The "sweet spot" for industry 4.0 is the intersection of operational, information and communications technologies.
- B. The "sweet spot" for industry 4.0 is the intersection of URLLC, eMBB and mMTC.
- C. The "sweet spot" for industry 4.0 is a deployment strategy for delivering the required capacity and coverage for industrials.
- D. The "sweet spot" for industry 4.0 is a double-digit revenue growth.
Answer: A
NEW QUESTION 16
What is Unified Data Management (UDM)?
- A. This network function stores or retrieves subscriptions, profiles and authentication data to or from the data repositories. It offers services to the AMF, SMF, NEF and AUSF using the Service Based Interface.
- B. This network function supports authentication for 3GPP and non-3GPP accesses.
- C. This network function is part of data repositories in the Common Data Layer and in opposition to the UDR, it stores non-standardized unstructured data.
- D. This network function provides registration and discovery functionality to enable other network functions/ services to discover and communicate with each other.
Answer: B
NEW QUESTION 17
What is the main benefit of Cloud RAN?
- A. Better latency
- B. Increase radio throughput
- C. Reduced cost by centralizing some radio functionalities
- D. Increased cell coverage
Answer: B
NEW QUESTION 18
What does 5G bring to Industry 4.0? (Choose two.)
- A. 5G will generate a huge amount of data and Information Technology will provide the computing platform with analytics and AI.
- B. 5G will generate a huge amount of data with mMTC and IT platforms are expected to suffer from this.
- C. 5G provides the connectivity (bandwidth, latency and reliability) needed to exchange data for OT and IT functionality.
- D. 5G brings nothing to Industry 4.0.
Answer: A,C
NEW QUESTION 19
Which of the following is not a part of an E2E Network Slice?
- A. Transport Slice
- B. Access Slice
- C. Cloud Slice
- D. Core Slice
Answer: C
NEW QUESTION 20
Your manager started a brainstorming session during a meeting on how automation can be driven in the network. He asks what tools can be used to increase automated services in the network. What would you answer be?
- A. We can write scripts that will be executed at certain times when a specific event happens and the service will be automated in this way.
- B. We can use big data. It is the main tool that should be used for network automation.
- C. We can create rule-based automation. We can also use Artificial Intelligence and Machine Learning to automate all network services.
- D. We need to find a software company that will write software to automate the network services.
Answer: C
NEW QUESTION 21
You and a colleague are discussing the challenges to be resolved in order to make digitization and automation a reality in all industries. He is arguing that the solution is to have faster access connectivity, but you don't agree. You are trying to convince him of the need for an end-to-end solution. The new 5G network should be built end-to-end to enable industries' quest for value. What arguments can you provide to support your position?
- A. Increasing throughput is not enough. A faster and automated transport network, a distributed cloud where applications would run depending on their latency and reliability requirements, a core network that automatically handles any type of access, and a security framework to guarantee the security in every layer of the network are also needed.
- B. The network consists of many layers that include access, transport, core, cloud, and all of the applications running in the cloud. Increasing throughput in access is not enough. The bit rate needs to be increased in all of the other layers as well.
- C. Increasing the access throughput might be worthwhile but applications that support a higher bit rate should also be a consideration.
- D. Increasing the throughput is enough. There is no need to change the network end-to-end.
Answer: A
NEW QUESTION 22
In a 5G Transport network, the encryption protection of the user and control plane are provided by which of the following?
- A. IPSec
- B. Access Control List
- C. X25
- D. SSH
Answer: A
NEW QUESTION 23
What is the "sweet spot" for Industry 4.0?
- A. The "sweet spot" for industry 4.0 is the intersection of operational, information and communications technologies.
- B. The "sweet spot" for industry 4.0 is the intersection of URLLC, eMBB and mMTC.
- C. The "sweet spot" for industry 4.0 is a deployment strategy for delivering the required capacity and coverage for industrials.
- D. The "sweet spot" for industry 4.0 is a double-digit revenue growth.
Answer: A
Explanation:
Explanation/Reference:
NEW QUESTION 24
What functionality is applied by SDN to find an alternative path in case of failure in the Transport Network?
- A. Alternative Path Computing
- B. Path Computation Engine
- C. Path Correlation Engine
- D. Alternative Route Finding
Answer: A
NEW QUESTION 25
Which of the following statements are applicable to the technology of massive MIMO?
(Select 3)
- A. The data flows are sent at the same time on different frequencies.
- B. Transmit diversity is used in case of poor radio conditions.
- C. Several data flows are sent at the same time on the same frequency.
- D. The signals on each antenna are made orthogonal.
Answer: B,C,D
NEW QUESTION 26
What are the five key features of 5G Core?
- A. Dynamic Control plane, Service Based Architecture, Multi-Access-Network, State-efficiency and Network Slicing
- B. Control and User Planes Separation, Service Based Architecture, Multi-Access-Network, State-efficiency and Network Slicing
- C. Dynamic Control plane, Adaptive Architecture, Converged-Access-Network, Stateless and Network Self- healing
- D. Dynamic Control plane, Adaptive Architecture, Multi-Access-Network, Stateless and Network Slicing
Answer: C
NEW QUESTION 27
In terms of scalability, flexibility, and capacity, which of the following would overcome 4G limitations?
- A. Service based architecture, stateless network functions, Cloud-ready network functions and modular network functions.
- B. Client/Server architecture, Cloud-ready network functions, and modular network functions.
- C. Client/Server architecture, stateless network functions, Cloud-ready network functions and modular network functions.
Answer: C
NEW QUESTION 28
Imagine that you are defining the 5G network requirements for the Industrial Automation of a port, what is the set of 5G technology enablers and horizontal applications that makes sense?
- A. Automation of cargo handling and integration with shorter ship turnaround times through improved predictability of operations is a video inspection system of important large infrastructure that requires
5G NR, FWA and High SLA slices. - B. Automation of cargo handling and integration with shorter ship turnaround times through improved predictability of operations is a video inspection system of important large infrastructure that requires
5G NR and central cloud. - C. Automation of cargo handling and integration with the logistics chain is an Autonomous Container Transport vehicles that requires 5G NR, Edge cloud and High SLA slices.
- D. Automation of cargo handling and integration with the logistics chain is an Autonomous Container Transport vehicles that requires 5G NR, central cloud and FWA.
Answer: C
NEW QUESTION 29
Which of the following drive 5G low latency? (Choose two.)
- A. Lower Time Transmission Interval (TTI)
- B. Support of up to 1 billion of IoT and sensors devices per km2
- C. Edge Clouds
- D. Higher spectral efficiency
Answer: A,D
NEW QUESTION 30
Which one of the following requires a network service package defined in a catalog?
- A. Cloud software platform
- B. Cloud infrastructure software
- C. Software defined network
- D. Cloud orchestration
Answer: D
NEW QUESTION 31
......
Guaranteed Accomplishment with Newest Feb-2022 FREE : https://dumpspdf.free4torrent.com/BL0-100-valid-dumps-torrent.html