Get 2024 Free BICSI OSP-002 Exam Practice Materials Collection
Get Latest and 100% Accurate OSP-002 Exam Questions
BICSI OSP-002 is a certification exam designed for individuals who want to become proficient in outside plant (OSP) design. OSP refers to the physical cabling infrastructure used to connect buildings, campuses, and other facilities to the telecommunications network. An OSP designer is responsible for the planning and design of the cabling infrastructure that connects the network to the end-users.
NEW QUESTION # 69
What is the derating factor for a 24 AWG (0.51 mm) stranded cords?
- A. 30%
- B. 10%
- C. 20%
- D. 60%
- E. 50%
Answer: C
NEW QUESTION # 70
A crimp-on connector like the Cat 5e/Cat 6 connector is also called a \_\_\_\_\_\_\_\_ connector.
- A. Insulation-displacement
- B. Solderless
- C. Clipper
- D. USOC
Answer: A
NEW QUESTION # 71
Below is the color code for _________________.
(Colors from left: 1-8: Blue stripe, Blue, Orange Stripe, Orange, Green Stripe, Green, Brown Stripe, Brown)
- A. Punchdown blocks
- B. TIA 568A Jack
- C. TIA 568B Jack
Answer: A
NEW QUESTION # 72
Before UTP cabling became widely used and the industry standard, most Ethernet Networks were connected over \_\_\_\_\_\_\_ cable.
- A. Telephone
- B. Coaxial
- C. Copper
- D. Shielded
Answer: B
NEW QUESTION # 73
Premise cables in LAN backbones may contain \_\_\_\_\_\_\_\_\_\_.
- A. Only singlemode fiber
- B. Only multimode fiber
- C. Both multimode and singlemode fiber
- D. Plastic optical fiber
Answer: C
NEW QUESTION # 74
Singlemode fiber systems covering long distances and using DWDM use \_\_\_\_\_\_\_\_\_\_ sources.
- A. DFB laser
- B. VCSEL
- C. LED
- D. F-P laser
Answer: A
NEW QUESTION # 75
Coarse wavelength division multiplexing (CWDM) systems require __________ to allow transmitting in the E-Band (1260-1360 nm).
- A. DFB lasers
- B. 1490 nm pump lasers
- C. Low water peak fiber
Answer: C
NEW QUESTION # 76
One cannot emphasize strongly enough the value of \_\_\_\_\_\_\_\_\_.
- A. Fiber optics
- B. Standards
- C. Cabling
- D. Documentation
Answer: D
NEW QUESTION # 77
Which multimode insertion loss test reference method is required in industry standards?
- A. OFSTP-14
- B. FOTP-34
- C. FOTP-171
- D. Any method as long as it is documented
Answer: A
NEW QUESTION # 78
For a cable tray installed within an ER, the RECOMMENDED access headroom is:
- A. 152 mm (6 in).
- B. 254 mm (10 in).
- C. 203 mm (8 in).
- D. 305 mm (12 in).
Answer: D
NEW QUESTION # 79
Which connector was chosen as the standard for the most recent EIA/TIA 568 cabling standard?
- A. SC
- B. Any connector with a FOCIS document
- C. ST
- D. LC
Answer: B
NEW QUESTION # 80
Why are punchdown blocks used with Cat 3 and Cat 5 cabling?
- A. Terminate cables from equipment
- B. Change from T568A to T568B terminations
- C. Meet EIA/TIA 568 Standards
- D. Interconnect cables in a telecom closet
Answer: D
NEW QUESTION # 81
10 dB corresponds to a factor of \_\_\_\_\_\_\_\_\_\_ in power.
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 82
What kinds of connection to the cable does a UTP jack typically have?
- A. Snap-in contacts
- B. 110 punchdown
- C. Solder connections
- D. 66 punchdown
Answer: B
NEW QUESTION # 83
Why is the structured cabling standard not like "code"?
- A. It doesn't deal with flammability
- B. It is not legally required
- C. It changes every year
- D. It is not written by the NFPA
Answer: B
NEW QUESTION # 84
In an optical fiber, the light is transmitted through the \_\_\_\_\_\_\_\_\_\_.
- A. Buffer
- B. Jacket
- C. Cladding
- D. Core
Answer: D
NEW QUESTION # 85
......
Maximum Grades By Making ready With OSP-002 Dumps: https://dumpspdf.free4torrent.com/OSP-002-valid-dumps-torrent.html