Pass Juniper JN0-363 Exam in First Attempt Guaranteed [Jun-2024]
Exam Sure Pass Juniper Certification with JN0-363 exam questions
The JN0-363 certification exam is ideal for network professionals who work in service provider environments, such as Internet service providers (ISPs), telecom companies, and cloud service providers. Service Provider Routing and Switching, Specialist (JNCIS-SP) certification exam is a valuable credential for professionals who want to advance their careers in the networking industry and demonstrate their expertise in service provider routing and switching. The JN0-363 certification exam is recognized globally and is a highly respected credential in the networking industry.
Juniper JN0-363 certification exam is an industry-recognized credential designed for network professionals who want to validate their skills and knowledge in service provider routing and switching. JN0-363 exam focuses on testing the candidate's ability to deploy, configure, manage, and troubleshoot Juniper Networks routers and switches in a service provider network. JN0-363 certification exam is targeted at individuals who are seeking to advance their careers in service provider network operations, design, and implementation.
NEW QUESTION # 74
Exhibit
Which two statements ate correct about the actions taken as the packet traverses the service provider MPLS network from Site 1 to Site 2 as shown in the exhibit? (Choose two.)
- A. R1 will perform a lookup using the mpls.0 table.
- B. R1 will perform a lookup using the lnet.3 table.
- C. R2 will perform a lookup using the mpls.0 table.
- D. R2 will perform a lookup using the inet.3 table.
Answer: C
NEW QUESTION # 75
Which two characteristics describe IS-IS? (Choose two.)
- A. A collection of Level 1 routers serves as the IS-IS backbone
- B. Level 2 routers connect areas in an IS-IS autonomous system
- C. A collection of Level 2 routers serve as the IS-IS backbone
- D. A Level 1 IS routes between areas and toward other autonomous systems
Answer: B,C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/concept/isis-levels-understanding.html
NEW QUESTION # 76
Which two configuration elements must match on all switches participating in the same MSTP region? (Choose two.)
- A. msti-revision
- B. mstp-version
- C. configuration-name
- D. revision-level
Answer: C,D
NEW QUESTION # 77
Which two statements are true about NSR? (Choose two.)
- A. NSR requires only one RE.
- B. NSR requires GRES to function properly.
- C. NSR requires graceful restart to function properly
- D. NSR requires redundant REs.
Answer: B,D
NEW QUESTION # 78
You are asked to assign interface xe-1/0/5 to a virtual switch. What must be accomplished to complete the configuration?
- A. Interface xe-1/0/5 must be added to routing-instance sw-1.
- B. Interface xe-1/0/5 must be added to routing-instance sw-1 vlan_2.
- C. Interface xe-1/0/5 must be a trunk port.
- D. An IRB interface must be configured to routing-instance sw-1 vlan_2.
Answer: A
NEW QUESTION # 79
Exhibit
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. Traffic ingressing ge-0/0/0 that is tagged will VLAN 100 will be dropped.
- B. Traffic ingressing ge-0/0/0 that is tagged with VLAN 101 will egress ge-0/0M with an outer VLAN tag of 200.
- C. Traffic ingressing ge-0/0/0 that is tagged with VLAN 101 will egress ge-0/0/1 unchanged.
- D. Traffic ingressing ge0/0/0 that Is tagged with VLAN 200 will egress ge-0/0/1 with an outer VLAN tag of 200.
Answer: A,C
NEW QUESTION # 80
You are adding an IPv6 configuration to an Interface on a Junos device.
In this scenario, which statement is correct?
- A. The link local address must be manually configured within the fe80::/10 prefix range.
- B. The link local address is automatically created using the MAC address within the fe80::'l0 prefix range.
- C. The link local address is automatically created using the MAC address within the fd00::/8 prefix range.
- D. The link local address must be manually configured within the fdO0::/8 prefix range.
Answer: C
NEW QUESTION # 81
Exhibit
You confirm that the R2 and R3 routers are receiving a BGP route to the 203.0.113.0/24 network, but both routers display the route as hidden. Referring to the exhibit, which two actions solve this problem? (Choose two.)
- A. Configure a routing policy on R1 that sets the next hop for the 203.0.113.0/24 BGP route to the IP address that R1 uses for IBGP peering.
- B. Configure a routing policy on R1 that sets the next hop for the 203.0.113.0/24 BGP route to the IP address that R1 uses for EBGP peering.
- C. Apply the routing policy on R1 as an export policy to the IBGP group.
- D. Apply the touting policy on R1 as an Import policy to the IBGP group.
Answer: A,B
NEW QUESTION # 82
Exhibit
You configured interface ge-0/070.0 to run IS-IS. but this interface does not appear in the output of the show isis adjacency command as shown in the exhibit.
What is the problem in this scenario?
- A. The family iso statement must be added to the logical interface.
- B. This is a Gigabit Ethernet interface, that is incompatible with the reference-bandwidth 100g statement.
- C. The router at the other end of the link is a Level 1 only router.
- D. The router at the other end of the link Is not sending any IS-IS Hello messages.
Answer: A
NEW QUESTION # 83
Exhibit
You are asked to assign interface xe-1/0/5 to a virtual switch.
What must be accomplished to complete the configuration?
- A. Interface xe-1/0'5 must be a trunk port.
- B. Interface xe-1/0/5 must be added to routing-instance sw-1.
- C. Interface xe-1/0/5 must be added to routing-instance sw-1 vlan_2.
- D. An IRB interface must be configured to routing-instance sw-1 vlan_2.
Answer: B
NEW QUESTION # 84
When working with an MPLS LSP, what will the install 172.16.6.0/24 active command accomplish?
- A. The command will install the prefix in inet.3 rather than inet.0
- B. The command will swap the prefix from inet.0 to inet.3
- C. The command will swap the prefix from inet.3 to inet.0
- D. The command will install the prefix in inet.0 rather than inet.3
Answer: A
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/lsp-routes.html#id-21214
NEW QUESTION # 85
Referring to the exhibit, which firewall filter action(s) will be applied to incoming frames to ge-1/0/3?
- A. Frames will be counted initially by filterA and then counted by filterB.
- B. Frames will be counted initially by filterB and then counted by filterA.
- C. Frames will be counted by filterA only.
- D. Frames will be counted by filterB only.
Answer: A
NEW QUESTION # 86
Referring to the exhibit, which statement is correct?
- A. R1 will advertise only the 10.200.3.0/24 prefix to the 192.168.1.5 neighbor.
- B. R1 will advertise the 10.200.1.0/24, 10.200.2.0/24, and 10.200.3.0/24 prefixes to the 192.168.1.5 neighbor.
- C. R1 will advertise only the 10.200.2.0/24 prefix to the 192.168.1.5 neighbor.
- D. R1 will advertise only the 10.200.1.0/24 prefix to the 192.168.1.5 neighbor.
Answer: A
Explanation:
Referring to the configuration in the exhibit, R1 is set to export the 3rd_Policy to the neighbor at 192.168.1.5.
Since 3rd_Policy permits the 10.200.3.0/24 prefix, only that prefix will be advertised to the neighbor.
References:
BGP Policies, Juniper Networks Documentation
Policy Framework, Juniper Networks Documentation
only 10.200.3.0/24 will be advertised. The neighbor export overrides anything at the group level and protocol level. Policies aren't additive, you can't apply all three at the same time. What if one of them rejected a prefix while the other accepted the same one? You need one to override the other
NEW QUESTION # 87
Click the Exhibit.
Referring to the exhibit, which IS-IS router will be selected as the DIS?
- A. Router 3
- B. Router 2
- C. Router 1
- D. Router 4
Answer: D
NEW QUESTION # 88
You are bringing a new network online with three IS-IS routers using default Junos election priorities. The routers are configured as Level 2 only IS-IS routers.
Which statement is true about the DIS election in this scenario?
- A. The router with the highest MAC address will be elected as the DIS.
- B. The router with the lowest numerical lo0 IP address will be elected as the DIS.
- C. The router with the lowest MAC address will be elected as the DIS.
- D. The router with the highest numerical lo0 IP address will be elected as the DIS.
Answer: D
Explanation:
Explanation/Reference:
NEW QUESTION # 89
......
Real Juniper JN0-363 Exam Questions Study Guide: https://dumpspdf.free4torrent.com/JN0-363-valid-dumps-torrent.html