Updated Dec-2023 Official licence for API-570 Certified by API-570 Dumps PDF
Grab latest Amazon API-570 Dumps as PDF Updated on 2023
API-570 certification exam is an essential requirement for individuals who want to advance their careers in the field of piping inspection. It is a challenging exam that tests an individual's knowledge and skills in various aspects of piping inspection. Piping Inspector certification is highly valued by employers and provides individuals with a competitive edge in the job market.
API 570 certification is widely recognized and respected in the industry, and individuals who hold this certification are in high demand. Piping Inspector certification is particularly valuable for individuals who work in the oil and gas, chemical, and petrochemical industries, where piping systems are critical components of the operation. Employers often seek out individuals who hold this certification to ensure that their piping systems are inspected and maintained to the highest standards.
Gaining API-570 certification as a piping inspector can be an excellent career move for professionals in the oil and gas industry. Piping Inspector certification program allows aspirants to acquire the skills, knowledge, and experience required to become confident and reliable piping inspectors. Furthermore, the certificate can help in achieving higher salaries, promotions, and career advancement. It is crucial to understand and comply with industry standards and regulations, especially in the oil and gas industry, and API-570 certification is a way to demonstrate compliance with industry best practices.
NEW QUESTION # 36
What is the minimum lifting power of an AC electromagnetic yoke used in magnetic particle inspection?
- A. 40 pounds lifting power at the maximum pole spacing
- B. 10 amps lifting power at the maximum pole spacing
- C. 10 pounds lifting power at the maximum pole spacing
- D. 30 pounds lifting power at the minimum pole spacing
Answer: C
NEW QUESTION # 37
With respect to a Class 400, NPS 12 slip on raised face flange, whose edges of the gasket do not extend to the bolt, what is the outside diameter of the gasket?
- A. 12.75"
- B. 15.00"
- C. 16.50"
- D. 18.00"
Answer: B
NEW QUESTION # 38
Piping subject to CUI includes piping insulated for personnel protection, especially:
- A. glass lined piping
- B. plastic piping
- C. carbon steel piping systems operating between 25°F-250°F
- D. carbon steel piping systems
Answer: C
NEW QUESTION # 39
When environmental or operating conditions produce snow and ice loads, these are considered to be.
- A. Dead loads
- B. structural loads
- C. live loads
- D. environmental loads
Answer: C
NEW QUESTION # 40
The valve used to automatically prevent back flow is valve.
- A. slide
- B. gate
- C. globe
- D. ball check
Answer: D
NEW QUESTION # 41
During a welder qualification test on 3/8" plate in the horizontal position, how many guided bends are required?
- A. 1 face and 1 root bends
- B. 4 tensile specimens
- C. 2 nick breaks
- D. 6 side bends
Answer: A
NEW QUESTION # 42
A welder qualified to weld in accordance with one qualified WPS is also qualified to weld.
- A. any other qualified weld procedure
- B. any WPS developed and tested by the welder's employer
- C. using the same welding process within the limits of the essential variables
- D. using a different welding process of a qualified weld procedure
Answer: C
NEW QUESTION # 43
After application of a non destructive evaluation technique, any resulting evidence is commonly referred to as
- A. porosity
- B. A crack
- C. an indication
- D. a leak
Answer: C
NEW QUESTION # 44
A WPS shall have the referenced
- A. welder
- B. PQR
- C. NACE
- D. PDQ
Answer: B
NEW QUESTION # 45
During a MT examination, shall be performed on each area.
- A. a calibration of each piece of magnetizing equipment
- B. prod spacing of at least
- C. at least three separate examinations
- D. 100% coverage at the required sensitivity
Answer: D
NEW QUESTION # 46
API 570 applies to piping systems for process fluids such as:
- A. Piping systems on trucks, ships and barges
- B. Plumbing, sanitary sewers and storm sewers
- C. Raw, intermediate, and finished products.
- D. Firewater
Answer: C
NEW QUESTION # 47
What is the acceptable method to temporarily repair a longitudinal crack in an existing piping system?
- A. Installing a full encirclement welded split sleeve
- B. Welding over the crack
- C. Using a full encirclement welded spilt sleeve, with the approval of the piping engineer
- D. Welding a box over the cracked area
Answer: C
NEW QUESTION # 48
In lieu of the required heat treatment after welding, what may be used as an alternative?
- A. Strain Harmonics
- B. Normalizing/annealing
- C. Air Hardening
- D. Quenching
Answer: B
NEW QUESTION # 49
For 1 1/4" thick carbon steel, what is the recommended preheat temperature?
- A. None
- B. 175°F
- C. 300°F
- D. 235°F
Answer: B
NEW QUESTION # 50
What is the root face limitation as listed on the attached WPS and PQR
- A. 1/8"
- B. No limit
- C. Not designated
- D. 3/32"
Answer: C
NEW QUESTION # 51
A DC yoke shall have a lifting power of at least
- A. 10 lbs.
- B. 5 lbs.
- C. 8 lbs.
- D. 40 lbs.
Answer: D
NEW QUESTION # 52
In piping systems, the most easily detected problem during operation is.
- A. leaks
- B. pipe coating condition
- C. pipe wall thickness
- D. pipe wall thinness
Answer: A
NEW QUESTION # 53
What is the pressure design thickness of NPS10A516 Gr.65 Type 22 pipe that operateat 1200psig/750°F
- A. 0.928"
- B. 0.432"
- C. 0.46"
- D. Not enough in formation given
Answer: C
NEW QUESTION # 54
......
Latest API-570 Exam Dumps API Exam from Training: https://dumpspdf.free4torrent.com/API-570-valid-dumps-torrent.html